Ready stock of Pipes & Tubes in Stainless Steel/ Alloy Steel/ Carbon Steel
Specialist in Carbon Steel Plate and Sheet

Carbon Steel Plate and Sheet

Used in instances where precise shapes and tolerances are not required, the Hot Rolled Carbon Steel Sheet is known to not only enhance the performance of the product, but also reduces the energy consumption and costs during production. Being the preferred alloy to be used during welding the Low Carbon Steel Coil & Sheet is what makes joining with conventionally used practises easy in addition to being highly ductile and having good toughness properties. Low Temperature Carbon Steel Plate is exclusively designed with the intention of being used in conditions where the temperatures can go as low as — 50°F, especially for low temperature equipment as well as for welded pressure vessel.

Carbon Steel Plate and Sheet

Referred to as deoxidized steel, the Killed Carbon Steel Plate Grades have no free oxygen molecule in the alloy, which in turn proves to be very useful as the resultant alloy has a uniform composition along with superior toughness. On the other hand Quenching CS Plate leads to an increase in its strength and hardness properties. When carbon steel is quenched, its microstructure is frozen, which is why the 4mm 01 Carbon Steel Sheet is to be subsequently tempered in order to transform its microstructure, which will optimise the hardness of the alloy as well as eliminate the stresses. Ageing, tempering or stress relieving can be performed on the Carbon Steel Plate to enhance the toughness, final hardness along with dimensional stability. To check out the Carbon Steel Plate Price In India, you can click on the link given here.

Specification Chart of Carbon Steel Plate

Specifications ASTM A283, A516 / ASME SA283, SA516
Thickness 3/16″ to 24″
Width & Length
1 mm TO 200 mm THK in 1000 mm to 3000 mm width x 2500 mm / 5000 mm / 10000 mm
grade
517 GR. 60 / 70, IS 2062, IS 2002
Surface 2B, 2D, BA, NO.1, NO.4, NO.8, 8K, mirror, checkered, embossed, hair line, sand
blast, Brush, etching, etc
Finish Hot rolled plate (HR), Cold rolled sheet (CR)
Form Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Strip etc.

Carbon Steel Sheet

Carbon steel plate usually been considered as the steel which does not contain much alloy steel elements. These Plates are available in different grades in the range of 0.4 mm to 80 mm in thickness

Quenching CS Plate Chemical Structure

Composition Percentage % Composition Percentage %
C 0.18 Cu 0.3
Si 0.4 Ni 0.3
Mn 0.95/1.50 Mo 0.08
P 0.015 Nb 0.01
S 0.008 Ti 0.03
Al 0.02 (Min) V 0.02
Cr 0.3 - -

Mechanical Behaviour of Cold Rolled CS Sheet

Properties Value
Tensile strength (N/mm2) 415/580
Yield stress/ min (N/mm2) 265

Carbon Steel Sheet Applications

  • Nuclear Power Plant Industry
  • Fertilizers Industry
  • Oil & Gas Industry
  • Aerospace Industry
  • Chemical Industry
  • Petrochemical Industry
  • Refineries Industry
Call Us Now
+91 22 62534000